Intel Wi-Fi 6 (Gig+) Desktop Kit, AX200, 2230, 2x2 AX+BT, vPro

Product Information

I agree with you; continued arguing isn’t useful. Mostly it really is a shame for you and customers that the PC disappoints those who want WiFi6/6E. I doubt that it doesn’t work because it was assembled in Mexico. These things are built for the US market, like many other electronics, and should conform to regional specs. Dell wouldn’t cross that line. If you're sure that you are staying disconnected, then keep uninstalling the drivers and rebooting until the drivers are gone. Remember that this is Wireless and BT both. In the BT case, the Intel driver is gone when you either don't see the device or you see the device listed generically with a Microsoft BT driver (I have modified my instructions above to make this clear).If this never happens (translation: you've done the uninstall/reboot, say, 10 times), then something is broken in your installation (most likely bad installer/uninstaller from Intel). You could try using Microsoft's troubleshooter (see this articlefor more information) or try one of the third-party driver driver removal products (I don't have a specific recommendation (I personally have never had to use one), but this articleprovides some recommendations).

And that’s it. If you’re using a Wi-Fi 6 or Wi-Fi 6E router, your computer can now connect to it using a Wi-Fi 6 (5GHz) or Wi-Fi 6E (6GHz) connection, respectively — both caps at 2.4Gbps using your newly installed adapter card. Here’s an Intel AX210NGW 2×2 Wi-Fi 6E module next to a fully assembled desktop Wi-Fi adapter card with an Intel AX200 Wi-Fi 6 module. Both are ready to be installed on a laptop or desktop respectively. Note the Bluetooth USB connector of the latter. Wi-Fi 6/6E upgrade on a laptop: Highly possible Term. This Agreement begins upon Your acceptance of its terms and continues until terminated under Sections 3 or 10.2. NO WARRANTY. The Materials are provided “as is,” without any express or implied warranty of any kind including warranties of merchantability, non-infringement, title, or fitness for a particular purpose. The Materials may include pre-release software or algorithms and may not be fully functional. Intel is not required to maintain, update, or support the Materials.Specifically, these are 2230 M.2 cards, which are 22m wide and 33mm long, that use the A or E key to connect to a host. To qualify for the upgrade, your computer must have a compatible slot for this card design. Of these options, the AX210 is the most versatile. Still, its 6GHz band is only officially supported in Windows 11. A special software driver is necessary to make it work with Windows 10. That’s also the case with the AX211 and AX411. You can not perform this Wi-Fi 6/6E upgrade on all existing laptops, but the chance is high with most released in the past decade or so. The requirement is that the machine must use an NGFF 2230 M.2 slot to host its current Wi-Fi adapter.

The 2.4 GHz uplink plot shows an even greater throughput advantage between AX and AC STA, as well as a better-behaved curve. We also once again see the AX200 outperform the Qualcomm-based Pal24 at attenuations beyond 54 dB. Intel has quietly launched its first Wi-Fi 6 (802.11ax) wireless network adapter, codenamed Cyclone Peak. The new WLAN adapter will deliver up to 2.4 Gbps network throughput when used with a compatible access point, but, like Wi-Fi 6 in general, its main advantage is that it will work better than existing adapters in RF-noisy environments where multiple Wi-Fi networks co-exist.

Launch Date

The ASUS ROG Rapture GT-AX11000 is the only tri-band router tested, but its Wi-Fi design is essentially the same as the RT-AX88U’s. I didn’t have NETGEAR’s tri-band AX12 Nighthawk RAX200 on hand, which has essentially the same design.

These two are generic and will work on any computer that has the supporting slot and correct software driver. I just feel bad for other customers that will lean on buying this PC for the Wifi 6E capability over say, the HP Omen 25L which is almost identical in specs and price but clearly states that it comes with a Wifi 6 card. This happened to me. Intel® Wireless Adapters with the CNVio (Intel® Integrated Connectivity) connector interface must be used with select Intel processors/chipset on systems/motherboards that are specifically designed to support it. Here is the list of Intel® Wireless Adapters that support Intel® Integrated Connectivity. Bingo! This laptop will support the Wi-Fi 6/6E upgrade if it hosts the current adapter via a 2230 M.2 slot. On the other hand, if the laptop has its Wi-Fi adapter soldered onto the motherboard or if it uses a Wi-Fi 4 or older adapter, it’s time to give up.First and foremost, you need a Wi-Fi 6 or Wi-Fi 6E adapter card to add it to your computer or replace the existing one. Each router was centered on the turntable in an octoBox 38 test chamber, as shown below. This box is part of the TR-398 testbed and will likely be the one used once the next revision of the SNB wireless test process is finalized. Only the left-hand set of antennas was used in these tests. The AX211 and AX411 both are Wi-Fi 6E chips. They respectively require a computer running at least an Intel 10th Gen or 12th Gen.

As mentioned above, buy the Wi-Fi laptop module and the converter PCIe adapter card (if necessary).The Rate vs. Range (RvR) test shows how throughput (rate) changes as signal level is varied (range). Instead of using physical distance to vary the signal by walking a laptop around, the router is placed in an RF-tight anechoic chamber (the octoBox) and programmable RF attenuators are used to change the signal. The diagram below shows the test setup. Effect of Termination. Upon termination of the Agreement, the licenses to You will immediately terminate and You must cease using the Materials and destroy all copies in your possession and direct Your subcontractors to do the same. Termination of this Agreement will not terminate the CNDA. I’ll first show how each router did with AC and AX STAs. First up is the ASUS GT-AX11000, the most expensive router in this round-up. The maximum throughput supported by the Wi-Fi 6 AX200 is a speedy 2.4 Gbps, but the key advantage of the Wi-Fi 6/802.11ax technology is not necessarily peak bandwidth, but rather improved spectral efficiency when working with compatible APs. In particular, the tech adds OFDMA (Orthogonal Frequency-Division Multiple Access) to allow different devices to be served by one channel, by dedicating different sub-carriers for individual client devices. As a result, even existing Wi-Fi 5 (802.11ac) client devices can benefit from a Wi-Fi 6 (802.11ax) AP, though matching Wi-Fi 6 devices will deliver the best results.