Grit 5000 Wet And Dry Sandpaper P5000 Waterproof Sanding Sheet Sand Paper

Product Information

Sanding with sandpaper that is too fine will require a lot of sanding and effort to get to the desired results.

When dealing with severe scratches and other similar scenarios, it makes sense to go to as high as 7,000 grit sandpaper (source: Red Bluff Daily). That’s usually enough time to finish sanding off the edges but change to new bits if you need to spend more time on the process.com/b/Paint-Paint-Supplies-Sanding-Supplies-Sandpaper/Sand-Paper/N-5yc1vZbobkZ1z0t8q0" on this server.

You need to wear protective gear to stay safe from the force of the machine and flying glass residue. Grab the piece of glass you’re working on and place the edge directly over the spot with silicon carbide and water mix. Keep in mind, if you can cut the glass down to size or replace it so you can start with a smaller piece, it’s best to explore those options first before sanding glass. Rather, the number scale refers to the number of holes per square inch in the screens that are used when sieving the abrasive grains during the sandpaper's manufacture.Many finer grits are used for wet sanding, which creates a fine, gritty slurry that complements the sandpaper's efforts at smoothing.

Unwrap the tape and wipe away any remaining tracing lines to get a frosted look on the glass surface. This guide will walk you through the different categories and help you navigate the finer points of sandpaper grit. As we stated above, keeping the sanding paper and the surface wet will deliver lubrication, improve the life of the sanding pad, provide lubrication and ensure the room doesn’t get filled with toxic silica. In the past I have had problems getting hold of the finer grades and when I have the cost has been prohibitive. In general, the process of preparing any surface for painting or finishing involves sanding with progressively finer grits until you reach the desired level of smoothness.Also, be very careful using this on veneer plywood since the thin face layers are easy to sand through. For heavy sanding and stripping, you need coarse sandpaper measuring 40- to 60-grit; for smoothing surfaces and removing small imperfections, choose 80- to 120-grit sandpaper. Some people go straight to cutting off part of the glass to save time and energy, but there are some scenarios where sanding the glass will deliver a better finish overall.