Opening Direction: Looking at the door outside the house, do you want it hinged on the left or the right? The two-pane can also be supplied as a French door. This white corner trim is used by many different sectors on both internal and external corners. White corner trim can provide edge and corner protection, as well as being a solution to hiding damaged or uneven surfaces. Dimensions: Two panes bi-fold. Min Height 2020mm Max Height 2400mm, Min Width 1500mm, Max width 2000mm Firstly, an explanation as to what uPVC actually means. PVC is an abbreviation for ‘polyvinyl chloride’ and ‘u’ is an abbreviation for ‘unplasticised.’ Therefore uPVC means the material is unplasticised polyvinyl chloride.

Applications include: car ports, covered seating areas, covered play areas, porches, patio canopy, caravan cover, cycle/smoking shelters The plastic we use for our plastic angle trims is an external grade rigid PVC which means our plastic angles are suitable for using outdoors as well as indoors. This type of plastic is also known generally as uPVC, even though uPVC actually is a different type of material. Our product is also often referred to as uPVC angle trim. How to fix a Plastic angle trim Yes, our plastic corner trim can be used outside as it is manufactured from an external grade rigid PVC. This means it has good weather ability properties. Some people ask us for uPVC corner trim, this term just means it is unplasticized and is suitable for use outside. The 'u’ next to PVC means the material is unplasticized, which means it retains rigidity. How many plastic corner strips will I receive? New this year, we now offer a convenient 1 Metre version of our standard Rigid Flat Bar available as single units across the entire range, can be easily butt-jointed for a neat finish. Please allow for +/- 2.00mm on any stated measurements for length. The system can accommodate pitches from 5 degrees to 15degrees, on standard modular kits the maximum projection is achieved at a pitch of 5 degrees.

Where can our PVC angle trim be used?

The most basic is the flat bar strip, whilst the plastic lipping is similar but has an added lip to the strip. Plastic angle trim is L shaped and plastic channels are U shaped. Plastic J channels and plastic capping are both J shaped.

We have 45 different sizes of white plastic angle trim, in sizes as small as 5mm going up to the largest at 100mm. Short pre-cut samples are available upon request which are then posted to you. There is an extra charge for the colour and a much larger meterage requirement is required. This is quoted upon request and depends on the size of the PVC angle trim, but the average is 2000 metres. White plastic angle trimRigid PVC strips are manufactured from a different material to our flexible plastic strips and we encourage you to request samples if you are unsure which material to choose. Our plastic PVC angle trim is priced competitively on a like for like basis, for exactly the same product made with the same standard of quality. The eaves beam cleverly double’s as an integral box gutter utilising the support posts as down pipes with the rain water exiting through the variable height post feet. They are manufacturedusing qualitymaterials, which makes them extremelydurable andthey will notrequire painting. As they are water-resistant, they won’t be affectedbydamp, and they will not growmold or mildew, which ensuresthat they’ll continue to look their best. The most likely match for someone searching for plastic channel edging is what we call Plastic Channels. These edging profiles are similar in shape to Plastic Angle Trim, but they have an extra leg, with both legs being equal in length. Plastic channel edging is sometimes referred to as U Channel which reflects the shape of this profile. Plastic angle edge trim

Plastic corner trim is often used to protect corners of walls from damage in a variety of settings including hospitals, schools, care homes and offices. Anywhere where people or objects are moving, leading to potential harm for hard surfaces.If you require thin plastic strip take a look at our range and see if we have a suitable size. It is possible for us to manufacture thin strips of plastic to other specifications but this would be custom production so is subject to much larger production runs, normally around 2000 metres. The minimum production runs would vary depending on the size of the profile and can be quoted upon request. uPVC strips - an explanation Plastic angle trim is manufactured by an extrusion process. Raw materials in the form of compound are fed into an extruder machine. The compound is heated and the molten polymer is pushed through a die. The die is a tool used in manufacturing to form material to a desired shape of the plastic trim. In this case the shape is a 90-degree L shape angle. The plastic profile is held in shape by formers and goes through water baths as part of the cooling process. The plastic angle trim then hardens upon cooling. The PVC we use for our rigid plastic angle trims Please note : The 1.6m relates to the length of the slope, therefore the horizontal projection will vary dependant on the selected roof pitch. The system is manufactured in maintenance free powder coated aluminium in white as standard with any RAL no. colour available at extra cost and lead time.